Firmware versions

Below is a table of all firmware releases for ATEM devices released by Blackmagic Design

stampupdateATEM 1 M/E Production studioATEM 1 M/E Broadcast panelGPI/TallyATEM Television StudioATEM 2 M/E Broadcast panelATEM 2 M/E Production studioATEM Production Studio 4kATEM 1 M/E Production Studio 4kATEM 2 M/E Production Studio 4kUnknownATEM 4 M/E Brodcast Studio 4kATEM TV Studio HDATEM TV Studio HDbdf4ATEM 1 M/E Advanced Panel 10ATEM TV Studio ProATEM Camera Control PanelATEM TV Studio HDATEM TV Studio Pro HDATEM TV Studio 4kATEM Constellation 8kATEM 1 M/E Advanced panel 10UnknownATEM MiniATEM Mini ProATEM 2 M/E Advanced panel 20ATEM 4 M/E Advanced panel 40ATEM Mini Pro ISOATEM Streaming BridgeATEM Mini ExtremeATEM Mini Extreme ISOATEM Constellation HD 1 M/EATEM Constellation HD 2 M/EATEM Mini SDIATEM Mini SDI Pro ISOATEM Mini SDI Extreme ISOATEM 2 M/E Advanced panel 30ATEM 2 M/E Advanced panel 40ATEM Constellation HD 4 M/EATEM Television Studio HD8ATEM Television Studio HD8 ISOATEM 4 M/E Constellation 4kATEM 1 M/E Advanced panel 20ATEM 1 M/E Advanced panel 30ATEM Television Studio 4k8ATEM Constellation 4k 1 M/EATEM Constellation 4k 2 M/EATEM Micro Panel
Latest8.1.19.68.0.18.1.19.68.1.18.1.18.10.18.1.16.58.07.07.47.48.07.49.3.28.1.18.1.18.99.6.29.68.6.28.69.5.19.69.69.5.18.6.59.5.19.5.19.6.29.6.28.89.5.19.5.19.69.69.6.29.0.29.0.29.6.29.69.69.39.6.29.6.29.6
2024-09-26
9.6.2

ATEM Switchers 9.6.2 Update

This software update adds support for Visca over IP control to all ATEM Constellation HD, 4K and 8K models as well as audio mapping and more multi-view display options to ATEM Constellation HD models. It addition, this update adds SuperSource borders to ATEM Constellation HD and 4K models and general performance and stability improvements for all models.

xxxxxxx
2024-08-27
9.6.1

ATEM Switchers 9.6.1 Update

This software update is for ATEM Streaming Bridge and fixes a bug where the HyperDeck streaming qualities were not available in the setup utility, as well as the XML file generated by the utility. It also restores the ability to use host names when streaming via the internet.

2024-08-16
9.6

ATEM Switchers 9.6 Update

This software update adds support for the new ATEM Micro Panel.

xxxxxxxxxx
2024-06-25
9.5.1

ATEM Switchers 9.5.1 Update

This software update adds improvements to localization and fixes an occasional issue that could cause intermittent loss of camera control for ATEM Mini Pro, ATEM Mini Pro ISO, ATEM Mini Extreme, ATEM Mini Extreme ISO, ATEM SDI Pro ISO and ATEM SDI Extreme ISO.

xxxxxx
2024-06-07
9.5

ATEM Switchers 9.5 Update

This software update adds support for SRT streaming and Blackmagic Cloud sync from ATEM Mini Pro, ATEM Mini Pro ISO, ATEM Mini Extreme, ATEM Mini Extreme ISO, ATEM SDI Pro ISO and ATEM SDI Extreme ISO. This update also adds support for routing of the webcam source, live editing of recorded files, network storage for external drives and additional multiview display options.

xxxxxx
2024-04-12
9.4

ATEM Switchers 9.4 Update

This software update adds support for the new ATEM 1 M/E Constellation 4K and ATEM 2 M/E Constellation 4K. In addition, this update adds support for more multiview display options to ATEM 4 M/E Constellation 4K, including borderless multiview, customizable border colors and the ability to enable or disable labels individually.

xxx
2024-03-19
9.3.3

ATEM Switchers 9.3.3 Update

This software update is for ATEM Constellation 8K and adds audio mapping, as well as colorspace and HDR override. In addition, this update adds more multiview display options, including borderless multiview, customizable border colors and the ability to enable or disable labels individually.

x
2024-01-31
9.3.2

ATEM Switchers 9.3.2 Update

This software update adds support for adjusting the camera detail setting from ATEM Camera Control Panel when used with compatible Blackmagic Design cameras. In addition, this update adds improved white balance control and handling of lens iris commands as well as a longer 24 hour timeout and support for Polish and Ukrainian languages for ATEM Camera Control Panel.

xxxxxxxxxx
2023-12-12
9.3.1

ATEM Switchers 9.3.1 Update

This software update adds audio mapping to ATEM 4 M/E Constellation 4K, as well as general performance and stability updates.

x
2023-11-28
9.3

ATEM Switchers 9.3 Update

This software update adds support for the new ATEM Television Studio 4K8.

x
2023-10-31
9.2.2

ATEM Switchers 9.2.2 Update

This software update adds support for the new ATEM 1 M/E Advanced Panel 20 and ATEM 1 M/E Advanced Panel 30.

xxxxxx
2023-09-21
9.2.1

ATEM Switchers 9.2.1 Update

This software update is for all ATEM Constellation HD switchers and improves tally and camera control, as well as adding improved support for German, French, Italian, Spanish and Portuguese translations.

xxx
2023-09-15
9.2

ATEM Switchers 9.2 Update

This software update adds support for SRT streaming protocol to ATEM Streaming Bridge.

2023-08-24
9.1

ATEM Switchers 9.1 Update

This software update adds support for the new ATEM 4 M/E Constellation 4K.

xxxxxx
2023-06-27
9.0.2

ATEM Switchers 9.0.2 Update

This update is for ATEM Television Studio HD8 ISO and adds support for recording the audio from MADI, XLR or RCA inputs when recording ISO projects.

xx
2023-03-23
9.0.1

ATEM Switchers 9.0.1 Update

This software update is for ATEM 4 M/E Constellation HD and adds webcam support, corrects headphone output channel mapping and extended tally support.

x
2023-02-24
9.0

ATEM Switchers 9.0 Update

This software update adds support for the new ATEM Television Studio HD8 and ATEM Television Studio HD8 ISO.

xx
2023-01-25
8.10.1

ATEM Switchers 8.10.1 Update

This software update provides improvements to optimize manufacturing of ATEM 1 M/E Production Studio 4K.

x
2022-10-21
8.10

ATEM Switchers 8.10 Update

This software update adds support for the new ATEM 4 M/E Constellation HD.

x
2022-09-15
8.9

ATEM Switchers 8.9 Update

This software update adds support for the new ATEM 2 M/E Advanced Panel 30 and ATEM 2 M/E Advanced Panel 40. In addition, this update adds compatibility for ATEM 1 M/E and 2 M/E Broadcast Panels with all current ATEM switchers, Ukrainian and Polish language support to all ATEM Advanced Panels as well as support for cameras with f/32 lenses to ATEM Camera Control Panel and ATEM Software Control.

xxxxxxxxx
2022-07-20
8.8

ATEM Switchers 8.8 Update

This software update adds support for the new ATEM SDI, ATEM SDI Pro ISO and ATEM SDI Extreme ISO switchers.

xxx
2022-05-25
8.7.1

ATEM Switchers 8.7.1 Update

This software update provides improvements to optimize manufacturing of ATEM Mini Pro, ATEM Mini Pro ISO and ATEM Advanced Panels.

xxxxx
2022-04-24
8.7

ATEM Switchers 8.7 Update

This software update adds support for the ATEM Constellation HD family of switchers.

xx
2022-04-20
8.6.5

ATEM Switchers 8.6.5 Update

This software update allows ATEM Streaming Bridge to send tally, talkback and camera control information to supported Blackmagic Design cameras via Ethernet.

x
2021-10-07
8.6.4

ATEM Switchers 8.6.4 Update

This software update adds support for Apple Mac M1 models when used with ATEM switchers and panels.

2021-08-24
8.6.3

ATEM Switchers 8.6.3 Update

This software update is for ATEM Camera Control Panel and improves tint reset functionality in the camera control settings, as well as providing general performance and stability improvements.

xxxx
2021-07-19
8.6.2

ATEM Switchers 8.6.2 Update

This software update adds Videohub Protocol to ATEM Constellation 8K for working with Videohub Smart Control and Videohub Master Control. ATEM Switchers 8.6.2 Update also adds support for ND filter control to ATEM Camera Control Panel when working with Blackmagic Pocket Cinema Camera 6K Pro as well as general performance and stability improvements.

xxxxxx
2021-04-08
8.6.1

ATEM Switchers 8.6.1 Update

This software update adds the ability to prioritize your ethernet or mobile data connection as well as adding support for TLS 1.2 encryption when streaming on ATEM Mini Pro and ATEM Mini Extreme models.

xxxx
2021-02-18
8.6

ATEM Switchers 8.6 Update

This software update adds support for ATEM Mini Extreme and ATEM Mini Extreme ISO as well as phone tethering support on ATEM Mini Pro and ATEM Mini Pro ISO.

xxxxx
2020-12-02
8.5.3

ATEM Switchers 8.5.3 Update

This software update has improvements for the ATEM 2 M/E Advanced Panel and ATEM 4 M/E Advanced Panel.

xx
2020-10-30
8.5.2

ATEM Switchers 8.5.2 Update

This software update fixes a bug which has caused some models of external USB disks to stop working with ATEM Mini Pro and ATEM Mini Pro ISO. Recommended update for all ATEM Mini models.

xx
2020-10-27
8.5.1

ATEM Switchers 8.5.1 Update

This software update improves input and monitor compatibility for all ATEM Mini models, as well as adding adjustable button brightness. This update also adds support for retaining still images in the media pool between power cycles for ATEM Mini Pro and ATEM Mini Pro ISO, and includes general performance and stability improvements for all ATEM Mini models.

xxx
2020-09-25
8.5

ATEM Switchers 8.5 Update

This software update adds support for the new ATEM Streaming Bridge as well as general performance and stability improvements.

xxxx
2020-07-31
8.4

ATEM Switchers 8.4 Update

This software update adds support for ATEM Mini Pro ISO. ATEM Switchers 8.4 also allows definition of audio bitrate in XML files and includes general performance and stability improvements for all ATEM switchers.

xx
2020-07-10
8.3

ATEM Switchers 8.3 Update

This software update adds support for ATEM 2 M/E Advanced Panel and ATEM 4 M/E Advanced Panel.

xxx
2020-06-10
8.2.3

ATEM Switchers 8.2.3 Update

This software update adds the ability for the user to select up to 8 frames of audio delay on analog microphone inputs of ATEM Mini and ATEM Mini Pro, as well as the ability to scale the DVE to more than 100% in size. ATEM Switcher 8.2.3 also includes general performance and stability updates for all ATEM Mini switchers.

xx
2020-05-12
8.2.2

ATEM Switchers 8.2.2 Update

This software update adds frame rate conversion to HDMI out on ATEM Mini Pro for compatibility with a wider range of monitors when working in lower frame rates as well as improving graphics quality in multiview display. ATEM Switchers 8.2.2 also includes general performance and stability updates for all ATEM Mini switchers.

xx
2020-04-15
8.2.1

ATEM Switchers 8.2.1 Update

This software update provides performance enhancements and improvements for all ATEM switchers.

x
2020-04-04
8.2

ATEM Switchers 8.2 Update

This update adds support for the new ATEM Mini Pro as well as general performance and stability improvements.

xx
2020-03-04
8.1.2

ATEM Switchers 8.1.2 Update

This software update provides performance enhancements and improvements for all ATEM switchers.

x
2020-01-22
8.1.1

ATEM Switchers 8.1.1 Update

This software update provides performance enhancements and improvements for all ATEM switchers.

xxxxxxxxxxxxxxxx
2019-11-13
8.1

ATEM Switchers 8.1 Update

This update adds support for the new ATEM Mini as well as general performance and stability improvements.

x
2019-10-08
8.0.3

ATEM Switchers 8.0.3 Update

This software update adds support for macOS 10.15 Catalina in addition to general performance and stability improvements for all models.

xxxxxx
2019-07-24
8.0.2

ATEM Switchers 8.0.2 Update

This software update provides performance enhancements and improvements for ATEM Constellation 8K.

xxxxx
2019-06-24
8.0.1

ATEM Switchers 8.0.1 Update

This software update provides performance enhancements and improvements for all ATEM switchers.

xxxxxxxxxxxxxxxx
2019-04-08
8.0

ATEM Switchers 8.0 Update

This software update supports the release of the new ATEM Constellation 8K.

xxxxxxxxxxxxxxx
2018-08-10
7.5.2

ATEM Switchers 7.5.2 Update

This software update adds compatibility for the new ATEM Camera Control Panel to the original ATEM Television Studio, ATEM 1 M/E Production Switcher and ATEM 2 M/E Production Switcher.

xxxxxxxx
2018-06-06
7.5

ATEM Switchers 7.5 Update

This software update supports the release of the new ATEM Camera Control Panel. For ATEM Television Studio Pro 4K, this update also adds improved audio support in LCD menus and enhanced audio dynamics monitoring when using ATEM Software Control.

xxxxxxxxxxx
2018-04-09
7.4

ATEM Switchers 7.4 Update

This software update supports the release of the new ATEM Television Studio Pro 4K.

xxxxxxxxxxx
2018-02-02
7.3

ATEM Switchers 7.3 Update

This software update lets ATEM 2 M/E Broadcast Studio 4K users upgrade their switcher to an ATEM 4 M/E Broadcast Studio 4K. In addition, this update also adds support for the ATEM 1 M/E Advanced Panel.

xxxxxxxxxxxxx
2017-07-20
7.2

ATEM Switchers 7.2 Update

The ATEM 7.2 update adds support for French, German, Spanish, Italian, Japanese, Chinese, Korean, and Russian languages to the built in LCD screen on ATEM Television Studio HD and ATEM Television Studio HD Pro. This update also improves audio follows video crossfades on all ATEM switcher models, along with general performance and stability improvements.

xxxxxxxxxxxx
2017-06-22
7.1.2

ATEM Switchers 7.1.2 Update

This software update adds support for the new ATEM Television Studio Pro HD as well as support for camera control using the DaVinci Resolve Micro Panel when used in conjunction with DaVinci Resolve 12.5.5 or higher.

xxxxxxxxxxxx
2017-02-21
7.0

ATEM Switchers 7.0 Update

This software update adds support for the new ATEM Television Studio HD, along with localization for Italian, Korean and Russian user interfaces in the ATEM Software Control Panel, in addition to the already existing English, French, German, Spanish, Japanese and Chinese.

xxxxxxxxxxx
2016-07-01
6.9

ATEM Switchers 6.9 Update

This software update adds new multi-view output features including VU meter overlays, the ability to switch program and preview positions, and the ability to turn off the safe area grid for all ATEM Production Studio 4K models and ATEM 2 M/E Broadcast Studio 4K. This update also adds rotational DVE functions to the ATEM 2 M/E Broadcast Studio 4K model.

xxxxxxxxxx
2016-04-18
6.8

ATEM Switchers 6.8 Update

This software update adds integration between all ATEM switchers and HyperDeck Studio disk recorders, allowing any HyperDeck Studio model to be fully controllable sources with ATEM Switchers. This update also adds 3G-SDI Level A support, language support for ATEM Software Control in French, Spanish and German, as well as non-rotational DVE for ATEM 2 M/E Broadcast Studio 4K, and more.

xxxxxxxxxx
2016-02-02
6.7

ATEM Switchers 6.7 Update

This update adds a new ATEM Switcher Utility design which includes support for firmware updates via ethernet for all ATEM Switchers. Also included in this update is GVG 100 protocol for remote control of all ATEM Switcher models with an RS-422 connection, as well as optional mute for talkback on audio channels 15 and 16.

xxxxxxxxxx
2015-11-09
6.6

ATEM Switchers 6.6 Update

This update adds support for Visca compatible PTZ remote control cameras to ATEM hardware control panels and ATEM switchers that have RS-422. You also get enhanced customized labels, and support for native Chinese and Japanese user interfaces.

xxxxxxxxxx
2015-08-12
6.5

ATEM Switchers 6.5 Update

This update adds support for the new ATEM 2 M/E Broadcast Studio 4K as well as general performance enhancements.

xxxxxxxxx
2015-03-26
6.4

ATEM Switchers 6.4 Update

This update adds new features for controlling Blackmagic Studio Cameras including image sharpening, enabling color bars for easy camera identification and setup, plus easy checking of audio levels and more.

xxxxxxxx
2015-02-12
6.3

ATEM Switchers 6.3 Update

This update adds new macro recording and playback features for all ATEM switchers. Macros let you create unique looks for your program by automating complex sequences of switcher functions that can be recalled with a single button.

xxxxxxxxx
2014-12-18
6.2

ATEM Switchers 6.2 Update

This update adds active MFT lens zoom control for customers using ATEM live production switchers with Blackmagic Studio Cameras.

2014-11-18
6.1.1

ATEM Switchers 6.1.1 Update

This software update provides USB 3.0 video capture support for Mac OS X, as well as general performance enhancements.

2014-10-02
6.1

ATEM Switchers 6.1 Update

This update includes new features for Camera Control including copy and paste between camera controllers, white balance and audio fade when using fade to back.

2014-07-31
6.0

ATEM Switchers 6.0 Update

This update includes a new user interface with resizable windows and support for remote control and color correction of the Blackmagic Studio Camera from the switcher. Requires Blackmagic Studio Camera software v1.8.2 or later.

2014-05-09
5.1

ATEM Switchers 5.1

This update includes general performance updates and improvements and it’s recommended for all ATEM production switchers.